Adding Cameras On The Internet - Planet ICA-550W User Manual

Port Number
Login
Setup Camera
Pages
Enable Motion
Detection
You can add the same Camera twice, once for the LAN (using
the LAN IP address), and again for the Internet (using the
Internet IP address). This will allow viewing the camera whether
you are on the same LAN as the camera or in a remote location.

Adding Cameras on the Internet

If the Internet Camera you wish to add is not on your LAN, but is available via the Internet,
click the Internet button. You will see a screen like the example below.
This will normally display "80". Only change this if requested to do so
by the Internet Camera Administrator.
The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
•
If the Administrator has not enabled this option, the Login fields can
be left blank.
•
Otherwise, you must enter the username and password allocated to
your by Administrator.
Click this button to connect the Web-based interface of the Camera
Check this if you want the Camera to have the feature enabled.
Figure 54: Add Camera from Internet
64