Web-Based Management; Introduction; Connecting To Internet Camera - Planet ICA-550W User Manual

Chapter 5

Web-based Management

This Chapter provides Setup details of the Internet Camera's Web-based
Interface. This Chapter is for the Camera Administrator only.

Introduction

The Internet Camera can be configured using your Web Browser. The Internet Camera must
have an IP address which is compatible with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as
described in Chapter 2 - Basic Setup.

Connecting to Internet Camera

•
If using only your Web Browser, use the following procedure to establish a connection
from your PC to the Internet Camera:
•
Once connected, you can add the Internet Camera to your Browser's Favorites or
Bookmarks.
Connecting using your Web Browser
1. Use the Windows utility to get the IP address of the Internet Camera.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Internet Camera.
4. You will then be prompted for a username and password.
•
If using the default values, enter admin for the name and password.
•
Otherwise, enter the Administrator ID and Administrator Password set on the
Maintenance screen.
5
34