12) Remote Configuration
1) SYSTEM SETTING
2) DISPLAY SETTING
A) ADMIN LOCK: YES/ NO
If ADMIN LOCK is selected as YES,
password is required whenever
user goes into menu. If NO, password
isn't requested.
B) Change password
C) Automatic time setting by
GMT+Hour time Server in worldwide
(it is not supported for 4CH DVR)
D) Exit without saving set-up
E) Save set-up value. The configuration
parameters will be transferred to remote
DVR then exit the window.
A) Channel Selection.
For DVR-1650, channel 1 to 16
will be active.
B) Picture Quality Setting
(Brightness, Contrast)
C) PTZ Camera Protocol Setting
D) Dwell Time Setting for Sequential
displaying and SPOT monitoring.
(SPOT DWELL Time isn't
supported in 4CH DVR )
E) OSD ON/ OFF Setting
G) Exit without saving set-up parameter.
F) Exit after saving set-up value.
Selected configuration parameters
will be transferred to remote DVR
52