Planet DVR-1650 User Manual page 17

Since DVR will detect the video format automatically, please
do not mix the NTSC/PAL cameras, otherwise, display will
ë
Note
be abnormal
3) PASSWORD:
Move Highlight bar to PASSWORD item using
And then press ENTER to change four-digit password, press
▲(UP /1), ▼(DOWN /3)
SYSTEM SETUP
3 PASSWORD
SYSTEM SETUP
3 PASSWORD
SYSTEM SETUP
3 PASSWORD
4) ADMIN LOCK:
Move Highlight bar to ADMIN LOCK item.
If ADMIN LOCK is selected as YES then password is requested whenever entering menu. If NO, then
password is not required.
5) TIME FORMAT:
24 HOURS (military time, ex: 16:00) or 12 HOURS (AM/PM, ex: 4:00 PM). Whenever time format is
changed, clock information on display monitor and playback will be changed together.
6) DATE FORMAT:
Choose a proper date format.
7) DATE/ TIME SET:
Move Highlight bar to DATE/TIME SET item, and then press ENTER to set the time.
ë
Before starting your DVR,
Note
setting properly.
If date and time is set older than some of your recorded
files, it will be difficult to manager DVR files.
.
buttons to input digits
**** OLD
****
NEW
****
AGN
YES/ NO
24/ 12 HOURS
MM-DD-YY/ DD-MM-YY/ MM-DD-YY
▲(UP /1), ▼(DOWN /3)
◀(LEFT/ 4), ▶(RIGHT /2),
Input old password. (Factory Default is 1111)
Input a new password.
Input the new password again to confirm new password.
DATE/ TIME SET
button.
should be
14