Using Easy Calibration - Sharp AR-C260M User Manual

Using Easy Calibration

Use Easy Calibration when there is only a small difference between the colors in the color chart and the
test page printed as explained on page 3.
Follow the steps below to perform Easy Calibration using the operation panel.
1
Enter the key operator programs.
To enter the key operator programs, see "Using
the key operator programs" on page 3 of the Key
Operator's Guide.
2
Touch the [PRINTER SETTINGS] key.
3
Touch the [COLOR ADJUSTMENTS] key.
4
Touch the [EASY CALIBRATION] key.
5
Load A4 or letter-size paper in the tray and
touch the [EXECUTE] key.
When the [EXECUTE] key is touched, "SELF
PRINT IN PROGRESS" appears in the display.
After a brief interval, the test patterns for Easy
Calibration will be printed. (see the following
page).
OK
6
Select the gray color that you prefer from
either of the printed test patterns (test pattern
2 or test pattern 3), and set the X and Y coor-
dinates of that color in the following screen.
For a detailed explanation of this procedure, see
"Easy Calibration" on the following page.
How to use the keys in the screen
:Touch the
:
and
desired color of gray.
7
Touch the [OK] key.
Your settings will be saved and you will return to
the Color Setting screen. Print a test page as
explained on page 3 and verify that the colors
match the colors in the standard color chart.
MEMO
If you cannot find an acceptable color of
gray in the test patterns, adjust the color
balance using the Color Balance settings
as explained on page 5.
OK
, ,
keys to select the
7