Checking The Colors - Sharp AR-C260M User Manual

Checking the Colors

The standard color chart included with the printer is used to check the colors on the printed test page.
Follow the steps below to check the colors.
Test page (printed by the printer)
Low Density
C M Y Bk
Low Density
If the result of the comparison is that:
• There is a large deviation in the color densities, use the Color Balance settings (see
the following page).
• There is a small deviation in the color densities, use Easy Calibration (see page 7).
4
Mid Density High Density
C M Y Bk C M Y Bk
Mid Density High Density
Low Density
Standard color chart (included with the printer)
Mid Density High Density
Place the color chart on
the printed test page as
shown. Check the den-
sity of the colors on the
test page and see if they
are adjusted to the same
level as the colors on the
chart.
standard color