Table of Contents
Advertisement
WP-300 for PB 3400.qxd
Installing the Fax Printer type 3 software
Important: Before you install the Fax Printer type 3 driver, make sure
Installing to Windows 95/98
Plug & play installation — Windows 98
Connect the 3400 P
interface cable. After Windows 98 reboots, it detects your 3400 P
O
and shows the message that new hardware was found. It then
PTION
compiles a driver database and the Add New Hardware Wizard appears.
1.
Click Next. The Wizard asks what you want to do.
2.
Select Display list of all drivers in a... and click Next.
3.
Click Have Disk...
4.
Insert the floppy diskette labeled Fax Printer type 3 driver for
Windows 95/98. Then click OK.
5.
Click Next, Next and then Finish. The Fax Printer type 3 driver
installation program will start. Follow the instructions that appear.
Plug & play installation — Windows 95
Connect the 3400 P
interface cable. When Windows 95 reboots, it detects your 3400 P
O
and prompts you to install the drivers. Follow the instructions
PTION
that appear on your screen.
Manual installation — both Windows 98 and Windows 95
Use this procedure if you reinstall the Fax Printer type 3 driver or if the
plug & play feature doesn't work.
1.
After Windows restarts, insert the Fax Printer type 3 driver
diskette for Windows 95/98 into your floppy disk drive.
2.
Go to Start > Settings > Printers, then double-click on Add
printer. The Add Printer Wizard appears.
3.
Click Next to begin installation.
12/16/99
6:54 PM
Page 3
that your computer meets the requirements described in
the Introduction (see page ii).
O
to your computer using the parallel
RINTER
PTION
O
to your computer using the parallel
RINTER
PTION
RINTER
RINTER
3
Hide quick links:
Advertisement
Table of Contents
