Pitney Bowes 3400 PRINTER OPTION Manual page 21

WP-300 for PB 3400.qxd
1. Current Status
This uses an icon to show the current PC/fax status.
If an error occurs, click Advice for more information of an error.
2. Status Change
You can change the communication status between your PC and fax.
When you click Connect, the Print Manager monitors printer status.
Note: When you print, you do not need to click this because the Print
Manager automatically connects to the printer.
When you click Disconnect, this disconnects the bi-directional commu-
nication between your computer and fax.
Note: Clicking this when you're not printing will provide a slight
improvement in your PC's processing speed.
Tuning
If necessary, click + (plus) or – (minus) to optimize communication
between your PC and fax. The Fax Printer type 3 driver software checks
whether the fax can receive data sent at high speed from your PC, and
then adjusts internal parameters (as necessary) to send data to the fax
at optimum speed.
Note: If using an IBM PS/2, please do not make either of the following set-
tings here: 5 or F.
12/16/99 6:54 PM Page 19
You can monitor and, if necessary, change the status of the
link between your computer and fax by clicking Option.
You'll see:
19