Connecting To Your Computer - Pitney Bowes 3400 PRINTER OPTION Manual

WP-300 for PB 3400.qxd

Connecting to your computer

Your authorized Pitney Bowes representative should install the 3400
P O
RINTER PTION
form this installation yourself.
Once the 3400 P
low the steps below to complete the setup. (Your representative may also
perform these steps for you as part of the installation.)
With the 3400 P
face port will be added to your fax machine.
1.
Turn off both your fax machine and computer.
2. Connect the bi-directional
parallel interface cable to
the 3400 P
port.
Note: If your cable does not
3.
Snap the port's wire clips
onto the interface cable.
4.
Connect the other end of the bi-directional parallel interface cable
to your computer's parallel port.
Note: Please see your computer's operating instructions if you need
2
12/16/99 6:54 PM
printer controller module to your machine. Do not per-
O module is installed on your machine, fol-
RINTER PTION
O installation, a Centronics
RINTER PTION
O 's
RINTER PTION
have a ferrite core
already fitted, install
the ferrite core
included in the
3400 P
RINTER
O 's packaging.
PTION
help with this step.
Page 2
® parallel inter-