Freecom MediaPlayer Drive-In Kit Manual page 52

Freecom MediaPlayer Drive-In
Setup Procedure
GB
1. Turn on the player and press [SETUP] on Mode Selection screen.
3
2. Move to 'TV Out' icon and press [ENTER]. Setup box will be displayed under
icon menu.
3. Move to Video Output Mode that you want and press [ENTER].
4.Press [SETUP] again to save the configurations.
3.2.2 Audio Setup
This chapter shows you how to set up the audio output of the player. You can
use Stereo or Digital 5.1 ch.
Analogue/DCPM: Select when you connect the supplied audio
cables (Red / White) to TV or Audio set directly.
Encoded Digital: Select when you want to listen through 5.1Ch
/ DTS Dolby by connecting receiver (or amplifier) with Optical or
Coaxial cable.
52