Freecom MediaPlayer Drive-In Kit Manual page 50

Freecom MediaPlayer Drive-In
GB
3. After you see normal screen, you have to save video configu-
ration of the player. See "3.2.1 Video Setup".
3
3.1.2 Connect Audio Cable
The player supports 3 type of audio output; "Stereo, Coaxial and Optical". Use
audio connection that your TV or Audio set supports. Normally, TV supports
standard stereo audio connection, the cable for this is supplied with the player.
Don't connect optical and coaxial cable together at the same
time!
When you do not hear sound after connecting Optical or Coaxial
Cable, you have to change audio setup of the player as Encoded
Digital. See "3.2.2 Audio Setup"
50
1. Stereo: Red & White RCA Cable (supplied)
Red
(STEREO-R)
(STEREO-L)
White
2.Optical (¨): Optical Cable for Digital 5.1 ch. (not supplied)
OPTICAL ( )
3. Coaxial: Coaxial cable for Digital 5.1 ch. (not supplied)
COAXIAL
Red Connect Stereo-R
(STEREO-R) Jack of TV.
(STEREO-L) Connect Stereo-L
White Jack of TV.
Connect Optical Jack of
Amplifier or Receiver
Connect Coaxial jack of
Amplifier or Receiver.