Basic Setup - Freecom MediaPlayer Drive-In Kit Manual

3.2 Basic Setup

3.2.1 Video Setup
This chapter shows you how to setup the video output of the player. You have
to setup the player's video output mode to correspond to the video input mode
of your TV.
When you do not see a normal screen after connecting video
cable, check the following:
1. "TV "– Switch to Video Input Mode: Turn on TV, and switch to
video input mode same as video connection. See TV user
manual.
2. "Player" – Switch to Video Output Mode: Press [VIDEO] button
repeatedly. Whenever [VIDEO] is pressed, the video output
signal is changed.
3. After you see normal screen, you have to save video configu-
rations of the player.
TTV Video Player Video
Input Mode Output Mode
Normal Video TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
S-Video TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
Component 480i TV Out: NTSC C/YPbPr
(HD Component OFF)
TV Out: PAL C/YPbPr
(HD Component OFF)
Component 480p HD Component Out On
480p
Component 720p HD Component Out On
720p
Component 1080i HD Component Out On
1080i
NTSC, PAL : Standard of TV Output. Select the corret one for use
in your country.
Use as Multimedia Player
Connection Jack Video Cable Type
of TV, Player
CVBS or Composite Yellow RCA Cable
Jack (Supplied)
(Generally Yellow
Jack)
S-Video Jack S-Video Cable
* Black rounded
Component 3 Jack Component Cable
* Y(Green), Pb(Blue), * Y(Green), Pb(Blue),
Pr(Red) Pr(Red)
GB
3
51