General Information - Freecom MediaPlayer Drive-In Kit Manual

Minimum System Requirements
USB Requirements
• Windows 98SE, ME, 2000, XP / MAC OS X 10.1 or higher / Linux 2.4.x or higher
• Available USB 2.0, 1.1 Port (USB 2.0 recommended)*
Network Requirements
• Windows 98SE, ME, 2000, XP
• Available 10/100 Ethernet LAN Port, RJ-45 (100Mbps recommended)
• LAN Cable (cross-wired or standard - see Page 28 2.1)
Hardware Requirements
• Pentium III 500MHz or faster
• At least 128 MB RAM
• USB interface (USB 1.1 or USB 2.0*)
• A CD-ROM drive or internet connection for driver installation
• For playback on TV, a TV with PAL or NTSC system is required.
• Support HDD: Compatible with standard 3.5" IDE Hard Drive
* USB 2.0 is downwards compatible to USB 1.1. To achieve optimal performance from the
Freecom Network MediaPlayer-35 drive in kit your PC should be equipped with an USB
2.0 port. USB 2.0 PCI Host Controllers are separately available at www.freecom.com.

General Information

GB
5