Package Content; Minimum System Requirements - Freecom Multimedia Player Manual

Freecom MediaPlayer Drive-In
Introduction
GB
The Freecom MediaPlayer-25 Drive-In Kit is 2.5" HDD interface type of MPEG4
player based on USB 2.0 High Speed. It can be connected to TV in home or a
monitor. It is not only an external USB HDD but also the best portable AV device
that displays Music, Movie and photo.

Package Content

Please check the contents of the box. The following should be supplied:
• Freecom MediaPlayer-25 Drive-In Kit
• DC Adaptor
• AV 1 Cable (Yellow / Red / White)
• AV 2 Cable (Yellow/S-Video)
• AV3 Cable (Yellow / Red / Green)
• USB Cable
• Remote Control
• AAA Battery
• Quick Install Guide
• CD with manual and USB 2.0 Driver for WIN98SE

Minimum System Requirements

The following hard- and software requirements must be fulfilled to ensure
trouble-free operation.
Hardware Requirements
• Pentium III 500MHz or faster
• At least 128 MB RAM
• USB interface (USB 1.1 or USB 2.0*)
• A CD-ROM drive or internet connection for driver installation (for WIN98SE)
• For playback on TV, a TV with PAL or NTSC system is required.
• Support HDD: Compatible with standard 2.5" IDE Hard Drive
* USB 2.0 is downwards compatible to USB 1.1. To achieve optimal performance from the
Freecom MediaPlayer-25 Drive-In Kit your PC should be equipped with an USB 2.0 port.
USB 2.0 PCI Host Controllers are separately available at www.freecom.com.
4