Freecom Multimedia Player Manual page 20

Freecom MediaPlayer Drive-In
5.1.2 Setup of HD Component (Progressive)
GB
NTSC, PAL: Standard of TV Output.
5
Select the proper one for using in your country.
• C(Composite): If a general cable (Yellow) is connected, no
need to change.
• S-Video: When connected by S-Video cable (Black) and the
screen color is black&white, you need to change the configu-
ration.
• Y,PB,PR: Use these settings when connected via Component
Video Output
In order to use Component connection, the TV MUST support [Progressive
Scan].
Select [Setup] button on the remote control.
Select [Video Setup] -> Press [Enter] or [ ] button.
Select [HD Component] output by using [
By using [ ] and [
1080i, off) and then press [Enter] button.
Now, the new configuration is applied
Be sure to press [Enter] button to confirm the new setup. Finally, press
[Setup] button to save the configuration.
20
or ] button, select the proper setting (480p, 720p,
] keys.