Connecting the player to a PC
3.1.2 Windows ME/2000/XP Users
GB
There is no need to install any Installation Driver.
3
Connect the player to the PC using the supplied USB Cable. The PC will
automatically detect the player as USB Mass Storage Device in [My Computer].
Check the Driver Installation
You can check whether the driver is installed correctly or not at Appendix:
"Check the Driver Installation for the Freecom MediaPlayer-25 at Windows".
Check whether the hard drive is formatted or not
If the assembled hard drive is not formatted, a PC will not detect the HDD. Refer
to Chapter 7: "Format the Built-in HDD via USB", for more details.
How to remove the Freecom MediaPlayer-25 Drive-In Kit safely from
a PC
Remove the player using the "safely remove" icon
from the Windows
taskbar. Not following this procedure may cause damage to the drive and/or
data loss.
3.2 Mac Users
There is no need to install an installation driver for Mac OS 10.x version; the
player will be detected automatically. If the Freecom MediaPlayer-25 Drive-In
Kit is detected correctly, an icon will appeared on your desktop.
To remove the player safely, drag the icon to the trash can and unplug the
player.
13