Assembling A Hard Drive Into The Mediaplayer - Freecom Multimedia Player Manual

Freecom MediaPlayer Drive-In
Chapter 2: Assembling a Hard Drive into the
GB
2
This chapter describes how to assemble or disassemble a hard drive to/from the
player.
Note: The HDD should be jumpered as "Master".
Pull a hasp to the arrow direction.
Open the top-cover and unscrew the
PCB.
Screwing HDD on PCB solidly by
using the supplied screws.
Put the back panel in.
10
MediaPlayer
Pull another hasp to the arrow
direction.
Pull the PCB out.
Insert the screwed HDD & PCB into a
case of Freecom MediaPlayer-25
Drive-In Kit.
Push each hasp to the arrow
direction.
Grip the hasp and pull it out to the
arrow direction.
Grip HDD and insert it into the pins
of PCB (be sure to match the 44 pins).
Screw HDD & PCB on the Freecom
MediaPlayer-25 Drive-In Kit by using
a screw driver.
Now the assambly is compleated.