Table of Contents
Advertisement
Model 3224 G.SHDSL IpDSLAM Installation Guide
Do the following:
1. Connect the earth ground of the AC source to the grounding stud on the IpDSLAM as described in the
section
"Grounding the Model 3224—AC and DC Power Supplies"
2. Install a power cable into an IEC-320 connector (see
3. Rotate the power cable retainer clip so it secures the power cable plug in the IEC-320 connector as shown
in
figure
7.
4. Repeat steps 2 and 3 to install the remaining power cable.
Cable installation
figure 6
Grounding stud
Figure 7. Power cable retainer clip
2 • Hardware installation
on page 21.
on page 22).
Power cable
retainer clip
23
Advertisement
Table of Contents
