1. Manuals
  2. Brands
  3. Patton electronics Manuals
  4. Server
  5. NanoServ
  6. Setup manual

Patton electronics NanoServ Setup Manual

Thin system/ultra-thin system
Hide thumbs Also See for NanoServ:
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
NanoServ™
Thin System/Ultra-Thin System
Setup Guide
1.0 What's included with the NanoServ™
The following items are included with the NanoServ™:
1.
NanoServ™
2.
AC Power Adaptor
3.
CD-ROM with User's Manual
4.
This Setup Guide
Note
Refer to the User Manual on the CD-ROM for complete information on installation.
2.0 Steps for setting up the NanoServ™
Note
This is a fanless system, so it must be properly mounted to allow for proper cooling. Be sure to use the
metal stand to hold the system upright with the blue LED on top, or mount the system at least 1 or 2
inches away from the flat side surfaces of the system. This will help keep the NanoServ™ cool and
within operating limits.
1.
Verify that the power supply switch is off (located on the back of the NanoServ™).
2.
Plug the monitor into the VGA port.
3.
Plug the keyboard into the PS/2 keyboard port.
4.
Plug the mouse into the PS/2 mouse port.
5.
Plug the printer into the DB-25 printer port (only available on the Thin NanoServ™ system).
6.
Connect the power adaptor to the mains power.
7.
Turn on the power supply switch located on the back of the NanoServ™.
Document Number: 09407U7-001, Rev. A
Part Number: 07M6070-QS
Revised: August 2, 2006
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: support@patton.com
WWW: www.patton.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NanoServ and is the answer not in the manual?

Questions and answers

Related Manuals for Patton electronics NanoServ

Summary of Contents for Patton electronics NanoServ

  • Page 1 LED on top, or mount the system at least 1 or 2 inches away from the flat side surfaces of the system. This will help keep the NanoServ™ cool and within operating limits.

  • Page 2: Front Panel

    3.0 NanoServ™ Ultra-Thin System Front panel Power LED The power LED lights up when the system is turned on. HDD LED The HDD LED flashes when the system is working. Please do not turn off the system when HDD starts running.
  • Page 3 4.0 NanoServ™ Thin System Front panel Power LED The power LED lights up when the system is turned on. HDD LED The HDD LED flashes when the system is working. Please do not turn off the system when HDD starts running.

  • Page 4: Additional Information

    5.0 Additional Information Refer to the NanoServ™ User Manual located on the CD-ROM shipped with your NanoServ™ system and available online at <www.patton.com/manuals> for detailed information about: Installing, configuring, operating, and troubleshooting. • Warranty, trademark & compliance • Note Specifications are subject to change without notice.
  • Page 5 WEEE collection system in your country for recycling. The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability CAUTION NanoServ Setup Guide...
  • Page 6 To prevent shock or fire hazard, do not expose your • NanoServ™ to rain or moisture. Never install your NanoServ™ in wet locations. • WARNING To avoid electrical shock, do not open the case. Contact the fac- • tory offices for qualified personnel servicing.

Table of Contents