Advertisement
1.0 WARRANTY INFORMATION
Patton Electronics warrants all 52X-TS Series components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or
consequential damages arising from the use of or inability to use this
product. Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.
1.1 SERVICE
All warranty and nonwarranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support: (301) 975-1007; http://www.patton.com; or,
support@patton.com.
Notice: Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 52X. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.
1
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions during
installation or use of the 52X-TS, contact Patton Electronics Technical
Support: (301) 975-1007; http://www.patton.com; or,
support@patton.com.
2.1 FEATURES
• Choose from 2, 4, 6, 8 or 10-wire Terminal Strip configurations
• Clamping voltages for RS-232, RS-422, RS-485, Token Ring or
Ethernet (Call for custom options).
• Supports asynchronous or synchronous data rates up to 20 Mbps
• Strain relief straps hold wires firmly in place
• Surge handling capacity of 1500 Watts
• Surge energy is diverted to ground through braided metal strap
• Screw terminals terminals are available for 18 - 28 AWG
• Made in the U.S.A.
2.2 DESCRIPTION
The Patton 52X-TS Series of terminal strip surge protectors lets
you design a custom surge protector to fit just about any 2, 4, 6, 8 or
10-wire application. To design your custom surge protector, specify the
number of lines you need protected. Then, specify the clamping
voltage (for example, 18V for RS-232, or 7.5V for RS-422, RS-485,
Token Ring or Ethernet) that is optimal for your application. Each surge
protector comes with input/output terminal strips and strain relief straps.
Simply attach your stripped wires to the surge protector and terminate
the ends with whatever connectors you choose. See Section 3.0 for
installation details.
The Patton 52X-TS Series provides reliable, transparent protection
at data rates up to 20 Mbps, so you can be confident using these
protectors in a wide variety of Local Area Networks (LANs), Wide Area
Networks (WANs), and data communications environments. Surge
energy is intercepted by a solid state hybrid circuit and diverted safely
to chassis ground through a braided metal strap. The 52X-TS Series
can handle repeated surge hits up to 1.5 k Watts without degrading its
performance.
2
Advertisement
