Ppp Statistics; Bad Address (Pppstatbadaddresses); Bad Controls (Pppstatbadcontrols); Packets Too Long (Pppstatpackettoolongs) - Patton electronics 2616RC Administrator's Reference Manual
T1/e1 tdm digital access concentrator (t-dac); g.shdsl tdm digital access concentrator (t-dac); idsl tdm t-dac
Hide thumbs
Also See for 2616RC:
- Specifications (2 pages) ,
- User manual (80 pages) ,
- Getting started manual (80 pages)
Table of Contents
Advertisement
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
PPP Statistics
Bad Address (pppStatBadAddresses)
The number of packets received with an incorrect address field.
Bad Controls (pppStatBadControls)
The number of packets received on this link with an incorrect control field.
Packets Too Long (pppStatPacketTooLongs)
The number of packets received that have been discarded because their length exceeded the maximum receive
unit (MRU).
LCP Statistics
This portion of the Statistics window shows LCP statistics of the PPP link selected.
Local MRU (pppStatLocalMRU)
The current value of the MRU for the local PPP entity. This value is the MRU that the remote entity is using
when sending packets to the local PPP entity. This setting becomes active when the link is in the up—able to
pass packets—operational state
Remote MRU (pppStatRemoteMRU)
The current value of the MRU for the remote PPP entity. This value is the MRU that the local entity is using
when sending packets to the remote PPP entity. This setting becomes active when the link is in the up—able to
pass packets operational state.
LCP Authentication (pppStatLcpAuth)
Authentication type used by the dial-in user. The following options are available:
•
none(1)
•
pap(2)
•
chap(3)
•
MSChap(4)—not currently implemented
Local ACC Map (pppStatLocalToPeerACCMap)
The current value of the ACC Map used for sending packets from the local unit to the remote unit. The local
unit sends this character map to the remote peer modem to ensure that the data being transferred is interpreted
correctly. This setting becomes active when the link is in the up—able to pass packets operational state.
Remote ACC Map (pppStatPeerToLocalACCMap)
The current value of the ACC Map used by the remote peer unit when transmitting packets to the local unit.
The local unit sends this character map to the remote peer unit to ensure that the data being transferred is
interpreted correctly. The remote peer unit combines its ACC Map with the map received from the local unit.
This setting becomes active when the link is in the up—able to pass packets—operational.
PPP link window
14 • PPP
228
Advertisement
Table of Contents
