Table of Contents
Advertisement
Operating Instructions
JPEG Conversion
"Start Time" should be within the
recording time.
Set the "Start Time" so that it
comes before the End Time.
Set the "End Time" to within the
recording time.
"Conversion Interval" should be
between 1 and (the number of
images - 1).
"Conversion Interval" should be
between 1 and (end time - start
time [seconds]).
"Conversion Interval" should be
between 1 and 3600.
The conversion file is possibly
being used in another application.
Confirm that it is not being used
and try again.
The recorded images could not be
found. Refresh the Recorded
Image List and try again.
A write error has occurred.
86
Problem
Cause and Remedy
• The start time is not within the recording time.
Follow the instruction message.
• The start time comes after the end time.
Follow the instruction message.
• The end time is not within the recording time.
Follow the instruction message.
• The frequency is not between 1 and (end time
- start time [seconds]), or the space was blank.
Follow the instruction message.
• The number is larger than the time period
between the start time and end time.
Follow the instruction message.
• The image is recorded for more than 1 hour,
but the converted interval is not between 1 and
3600.
Follow the instruction message.
• The converted file has been opened in
another application.
Close other applications and try again.
• There is no recorded images.
Refresh the recorded images and try
again.
• An error has occurred in JPEG conversion.
Advertisement
Table of Contents
