Using Operation Bar - Panasonic HNP11 Operating Instructions Manual

2.6.2

Using Operation Bar

You can operate camera on the monitoring page. If the feature is not permitted, the
buttons are grayed out.
If the camera disables their controls, you cannot control their features.
*1
Preset
Display:
Refresh:
Pan/Tilt
Scan :
*1
Pan/Tilt/Home
Position*
1
Preset
Button* :
1
Zoom*
1
Focus*
1
Brightness* :
1
Resolution* :
1
Image
Quality* :
1
When clicking a preset button, the preset name
appears. Camera operation information is also
displayed.
The latest registered buttons are displayed (see
page 54).
Moves the lens throughout the horizontal (
vertical ( ) range, and returns to the original
position.
Controls lens direction.
Pan ( : Left,
: Down) and Home Position (
Applies the camera direction to a preset position.
Zooms in or out (see page 52).
Tele , Wide
Focuses the image (see page 53).
Near , Auto
Changes brightness in nine steps including [STD]
(Standard). Clicking [-] or [+] changes the image
brightness.
Selects [640 x 480], [320 x 240] (default) or [160 x
120] pixels.
Selects the image quality.
• [Favor Clarity] optimizes the image for good
clarity.
• [Standard] keeps the standard quality. (default)
• [Favor Motion] optimizes the image for motion
display.
Operating Instructions
: Right), Tilt ( : Up,
, Far
) or
: Center)
51