Parameters
(a) Select your destination folder for backup. See page 26 for how to
access the backup page.
•
Create the folder in advance.
•
The level of the folder-hierarchy depth must be within 6 to prevent
the system from getting unstable.
(b) Set the hard disk free space to stop backing up before the system
becomes full.
•
Set enough capacity (100 MB or greater) as your destination
folder to prevent the system from getting unstable.
(c) Set the date and time to execute backup.
Notes
•
Backup feature automatically creates the last dated folder, and copies the
recorded images and data for search in the destination folder.
•
Backup feature backs up only newly-recorded images after the last
backup was executed.
•
If the capacity has reached the limit, the backup is stopped, and error
message is displayed (see page 93).
•
The backup images can be searched. Select [Backup Image] on the
search page (see page 65).
•
The recording operation of this software may be delayed during backup.
•
If images are recorded during backup, the recorded images will be backed
up next time.
•
Do not manually delete, move or change any files in the index folder
or data folder in the backup folder.
Operating Instructions
29