Troubleshooting; Printing Operation Fails - Panasonic DP-2310 Operating Instructions Manual

Troubleshooting

Troubleshooting

Printing Operation Fails

If the printing operation fails, check the following items first:
• The connection cable (Parallel/USB cable or Ethernet LAN cable) is properly connected.
• Power of the device is turned ON.
• Paper is loaded properly in the device.
• An error message is not displayed on the device. (See Note 1)
The above points can be verified by printing a test page. Refer to the following for procedures on test page
printing:
Windows 98/Me
Windows NT 4.0
Windows 2000/XP
NOTE
202
[General Tab] (See page 43)
[General Tab] (See page 52)
[General Tab] (See page 63)
1. The status of the devices can be verified by the status monitor (see page 170).