Network Configuration Editor/Address Book Editor
Basic Operation
Retrieve Data
1
2
186
Status Indication
When Network Configuration Editor or
Network Address Book Editor is started from
Network Device Locator or the pre-installed
shortcut, it connects to the device, retrieves
the data, and then displays it automatically.
A Process status is indicated in the bottom
right side of the window.
Note:
If the device password is changed
(Key Operator Code) from the default
value (0000), it is not possible to
retrieve the data.
In this case, enter the password in
advance to the Default Password in
→
the Tools
Configuration....
If you want to retrieve the latest data again
from the device, click the
Retrieve from the Transfer menu.
Note:
If the device is in an operating
condition (copying, printing, etc...), it
is not possible to retrieve the data
(Retrieving error). Try again later
after the device enters the standby
condition.
→
Options
FTP
icon, or select