Panasonic KX-TA824 Programming Manual page 89

Parameter
Word Length
Stop Bit
Parity Bit
When connecting the KX-TA Maintenance Console to the PBX using an RS-232C cable, assign the following
values to the Serial Interface (RS-232C) port of the PBX:
Baud Rate (bps): 9600
Word Length: 8 bits
Parity Bit: None
Stop Bit: 1 bit
Connection parameters for Modem
Parameter
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Flow Control
Modem Initialize
Initialize
Values
8 bits
1 bit
None
Values
0-9, *, #, "-" (hyphen)
and "," (comma)
Auto (Tone), Auto
(Pulse), Manual
–
COMx
1200, 2400, 4800, 9600,
19200, 38400, 57600,
115200
None, Hardware
Default, Custom
–
Explanation
Displays the number of bits in a word. This
value cannot be changed.
Displays the length of the stop, used to identify
the end of a transmitted group of bits. This
value cannot be changed.
Displays the kind of parity error-checking used.
This value cannot be changed.
Explanation
Telephone number to be dialed to access the
PBX.
Outgoing dialing method. If "Manual" is
selected, a telephone must be connected in
parallel to dial.
Enter a comment to help to identify this profile.
Specify the number of the COM port assigned
to the PC's modem interface. Only available
COM ports will be displayed.
Specify the speed of data transmission.
Specify whether the rate of data transfer is
managed by hardware or not.
Specifies the command used to initialize the
modem. If "Custom" is selected, enter the
initialize string in the text box. Refer to your
modem's instruction manual for more details.
Click to send the specified initialize string to the
modem.
4.1 Software Modes
Programming Manual 89