Station Programming Instructions - Panasonic KX-TA1232 User Manual

Station Programming

2.1 Station Programming Instructions

2.1.1 Station Programming Instructions
Station Programming allows you, the proprietary telephone (PT) users, to program certain
features from your telephone individually. To program, you need to switch your telephone to
the Station Programming mode. During programming mode, your telephone is in the busy
condition to both inside and outside callers. If you want to make a normal call handling
operation, you must finish the programming mode.
Programming Mode Display
When you enter into the Station Programming mode, the display shows the following message
as the initial programming mode;
PT-PGM Mode
We recommend a PT with display for Station Programming to avoid mis-operation.
The display also gives you helpful or stored data information related to your programming
steps. In this section, we note the display example in the programming steps, if required. You
can also refer to the "Display Examples" in the Appendix (Section 6).
Entering Station Programming mode
PT
Be sure that the telephone is idle and on-hook.
PAUSE
Press PAUSE.
The STORE indicator lights.
If 99 is not dialed within 5 seconds after the PAUSE button is
pressed, the Station Programming mode is canceled.
<PT Display Example>
If there is no entry within one minute, the Station Programming mode
is canceled and normal call handling mode resumes automatically.
30
9
Dial 99.
-
PT-PGM Mode
9
Initial programming display
User Manual