Panasonic KX-TA1232 User Manual page 53

Programming
Display PT
0 0 1
Dial 001.
<PT Display>
001 SYS SPD DIAL
Repeat these steps
telephone no.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
<To end:>
END
Press END.
Conditions
• Each speed dial number has a maximum of 24 digits. The valid characters are 0 through
9, , and # keys, and the FLASH, PAUSE, SECRET and "–" (hyphen) buttons.
— To store the flash signal, press FLASH.
Note: The Stored flash will only be effective during an established call.
— To store a hyphen, press the "–" button.
— To store a pause, press PAUSE.
(Refer to Pulse to Tone Conversion in the Features Guide)
User Manual
NEXT
Press NEXT.
<PT Display>
SPD Code?
<To continue:> [When SELECT is pressed]
STORE
Press STORE.
Press NEXT or
PREV or SELECT.
speed dial no.
Enter a speed dial number
(000 through 499).
To enter speed dial number 000,
you can also press NEXT.
<PT Display Example>
000:Not Stored
NEXT
speed dial no.
Enter the desired speed
PREV
dial number
(000 through 499).
SELECT
User Programming
53