Panasonic KX-TA1232 User Manual page 73

Entering account codes during or after a conversation
During a conversation or within 15 seconds after the other party hangs up;
PT
(Account)
account code
Press Account Enter an account code
(flexible button). (10 digits max., 0...9).
The corresponding
indicator light turns on.
You can keep talking.
Conditions
• In Verified - All Calls mode, you must always enter a pre-assigned account code when
making any of the following calls unless it has previously been stored in memory.
a)
Call Forwarding — to Outside Line
b)
Manual Dialing (Selecting an outside line)
c)
One-Touch Dialing
d)
Personal Speed Dialing
e)
Pickup Dialing (Hot Line)
f)
Redial, Last Number
g)
Redial, Saved Number (PT only)
h)
System Speed Dialing
• In Option mode, it is possible to record a calling or called party's account code in the
SMDR, during a conversation or within fifteen seconds after the other party hangs up.
• There is no need for an account code entry when receiving incoming calls.
• To clear and re-enter the account code, press " ".
• An account code can be up to 10 numeric digits (0 through 9). FLASH, PAUSE, etc. are not
allowed. After entering an account code, the delimiter "#" or "99" must be entered.
• Memory Dialing
An account code can be stored into Memory Dialing ("One-Touch Dialing", "System /
Personal Speed Dialing" ). The sequence to enter an account code into Memory Dialing is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
User Manual
Dial #.
You may dial
99 instead
of "#".
Station Features and Operation (PT/SLT)
or
73