Panasonic KX-TA1232 User Manual page 83

• Two extensions can set each other as the destination extension. In this case, an intercom call
to the other party while he/she is absent will not be forwarded back to the original extension.
• Confirmation tone
Confirmation tone 2 (two beeps) is sent when the previously programmed data is same as
the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to the "Tone List" in
the Appendix.
• You can call the original extension from the Call Forwarding destination extension. (Boss
Secretary)
<PT>
• Both the Call Forwarding and Do Not Disturb (DND) functions can be programmed at
the same time, but either one of them can be activated at a time.
• You can enable or disable the Call Forwarding or Do Not Disturb (DND) function by
pressing the FWD/DND button while on-hook. If you set both Call Forwarding and
DND, alternating the mode is also available by pressing the FWD/DND button. In this
case, pressing the button changes the setting as follows:
The lighting patterns of the FWD/DND button are as follows:
User Manual References
2.2.2 Flexible Button Assignment
4.3.15 Call Forwarding — CANCEL
4.3.38 Do Not Disturb (DND)
4.3.84 Voice Mail Integration
This setting can changed by System Programming.
*1
User Manual
DND FWD OFF
Off: Both functions are canceled.
Red on : DND mode
Red flash : FWD mode
*1
*1
Station Features and Operation (PT/SLT)
83