Busy Tone Selection - Panasonic EASA-PHONE KX-T30810 Installation Manual

until the desired mode appears
~-.----.---.-~I
[24] [NEXT] [SELECT] [MEMORY][END]
s
For telephone instruments that have automatic
busy tone detection, it is suggested that busy
tone type (I) is to be used.
Selection
of
busy tone type (I) insures that the
camp-on feature of the Panasonic ITS phones
will operate.
Because Panasonic ITS phones are equipped
with automatic busy tone detection in the
speakerphone mode, calls will be terminated
upon hearing a busy tone signal
of
tone type
(2) therefore camp-on feature will not be
activated.
e
See page 5-17.
"BUSY TONE SELECT" will be displayed.
a
Press the NEXT button.
"TONE: 1" will be displayed and "1" will
blink.
3. Press the SELECT button to alternate be-
tween "TONE:l" and "TONE:2".
*
Press the MEMORY button.
The blinking LCD will stop.
5. To return to the initial program mode, press
the END button.
2-32