Example Of Programming - Panasonic EASA-PHONE KX-T30810 Installation Manual

n
Turn the Power Switch to ON
. . . . . . . . . . .
~ Set the System Program Switch to PROGRAM
. . . . . . . .
The LCD on the KX-T30830 shows "ENTER
PGM CODE".
Be sure the handset of the extension 1'1 is in the cradle and
the speakerphone button
of
the extension 11 is off.
* To program automatic line access number 9 and the phone
number 987-654-3210 into memory location {speed dial
access) number 00. (Refer to page 2-5.)
Dial (00) or press the Dial (00) or press the
NEXT button. NEXT button.
*
Dial "9".
I' -"
button.
g ;;?&)87".
@ Press "-"
button.
@ Dial "654".
@ Press "-" button.
@ Dial "3210".
Press "-"
button.
Press the MEMORY
T I
ension II
she
Display
ISPEED
c~mmG
1
ENTER SPEED CODE
If
nothing is stored in
access code "OO",
100: NOTSTORED 1
If
already stored the
automatic line access
number 9 and the
phone number
123-456-7890.
[ 00: -123-456-7890 ]
100:
-987-654-3210 1
00: -987-654-32.10
button.
To program a next
access coae,
press the NEXT
button.
To program a desired access code, press the
SELECT button and then dial the number.
1 7. ) Repeat step 4 to 6.
)
While programming
if
a mistake is made,
. Press the "END" button.
2. Start programming procedure from
the beginning.
You will hear the beeps after press the
MEMORY button.
The MEMORY indicator light goes on when
the MEMORY button is pressed, and then
Indicator light goes out when the NEXT
or
PREV button is pressed.
~ Return the System Program Switch to SET
To make program change, start from the beginning.
2-3