Programmable Call Waiting - Panasonic EASA-PHONE KX-T30810 Installation Manual

[16] [NEXT] [AB] [SELECT] [MEMORY] [END]
~6~~~EXT][NEXTI[SELECTI[MEMORYI[END]
-
L......
until the desired extension number appears
During a conversation, call waiting tone will be
heard when the third party on the outside or
intercom calls you.
Call waiting tone can be removed or added at
customer's request.
Set to "ENABLE" for call waiting.
"CALL WAITING" will be displayed.
2. Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"II: DISABLE" will be displayed and
"DISABLE" will blink.
5. Press the MEMORY button.
The blinking LCD will stop.
.
Repeat steps 3 to 5, to program the assign-
ment off the other extensions.
7. To return to the initial program mode, press
the END button.
s
When you start the programming from step 1,
may dial the desired extension number
ad of
the NEXT button at step 3.
e PREV button allows you to go to the
previous extension
for
displaying the call
waiting selection.
See page 5-16.
. Press the SELECT button, to alternate between
ENABLE and DISABLE to select the desired
mode.
2-24