Telephone Directory; Store A Number/Name In The Directory - VTech t2326 User Manual

Speed Dialing
• Press REDIAL/
to display
PAUSE
the last number
dialed from this

Telephone Directory

phone to store it in
speed dial memory.
Your phone can store 10 (including the nine speed dial entries) numbers with names (up to 15 characters
for the name and 24 digits for the number) in each handset.
When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be
able to store a new number until you delete a stored number.

Store a Number/Name in the Directory

16 BASIC OPERATION
entry you wish to reassign.
2. When the screen displays the entry you want to reassign, press SELECT. Then press
until SPEED flashes.
3. Press SELECT. The screen displays ENTER 1-9.
4. Press the keys (1 through 9) to reassign this entry into another memory location.
1. Press PROG. The screen displays DIRECTORY.
2. Press SELECT. The screen displays ENTER NAME.
3. Using the chart on page 14, enter up to 15 characters for the name you're storing with the number.
Use to backspace and make corrections; use
4. When you finish entering the name, press SELECT. The screen displays ENTER NUMBER.
5. Enter the telephone number. Use
Press REDIAL/PAUSE to store a pause in the dialing sequence.
-OR-
Press REDIAL/PAUSE if you wish to display and then store the last number dialed.
www.vtechphones.com
or to advance and add a space.
to backspace and make corrections.