Table/Desk Installation; Wall Mounting - VTech t2326 User Manual

Installation

Table/Desk Installation

Connect the power cord. After charging the
battery for at least 16 hours, connect the
telephone line cord.

Wall Mounting

Your phone base unit is designed to mount on
a standard telephone wall plate. Wall mounting
is optional.
1. Run the power and telephone cords through
the slot, then connect them to the jacks located
on the underside of the base.
2. Plug the AC adapter into an electrical outlet.
If the battery has not been previously charged,
place the handset in the base, and allow it to
www.vtechphones.com
• Install the base unit
away from electronic
equipment such as
�����������������
personal computers,
����
television sets or
microwave ovens.
Avoid excessive
heat, cold, dust or
moisture.
�������������������
������
GETTING STARTED 5