TP-Link TL-WA801ND User Manual page 16

Note:
If you click Exit and choose to manually configure the AP on your own need, please note that
the DHCP is enabled during the configuration, it is essential to disable DHCP when all the
settings are finished.
3. The Operation Mode page will appear then, shown in Figure 3-4. The TL-WA801ND
supports up to five operation modes.
In Access Point mode, the product will act as a wireless central hub for your wireless
LAN clients, giving a wireless extension for your current wired network.
In Repeater(Range Extender) mode, the product can extend the coverage of another
wireless Access Point or Router. The universal repeater mode is for the wireless Access
Point or Router which does not support WDS function.
In Bridge with AP mode, the product can wirelessly connect two or more remote LANs
together.
In Client mode, the product will act as a wireless adapter to connect your wired devices
(e.g. PC, Xbox, PS3, etc. ) to a wireless network.
In Multi-SSID mode, the product can be assigned up to four SSIDs to work with your
VLAN.
4. Select the operation mode based on your need.
A. When you choose Access Point mode, the Wireless Setting page will be shown in Figure
3-5.
TL-WA801ND 300Mbps Wireless N Access Point User Guide
Figure 3-3 Quick Setup
Figure 3-4 Operation Mode
8