DSC Envoy NT9005 User Manual page 2

Q u i c k R ef e r e n c e G u i d e
The following chart lists the basic functions of your system, and the keys to press for each
function. Refer to the listed page number for more information.
NOTE: Some functions may not be available on your system. Ask your installer for
more information.
To Perform This Function:
Turn on system (Away): ..................... [access code], leave through entry/exit door
Turn on system (Stay):........................ [access code], do not leave premises
Turn off system:................................. [access code]
Turn on system (No Entry Time): ........
Turn on system (Quick, if enabled):? ..
Turn on rest of system (if Stay armed):
Exit premises when system on: ..........
Turn off zones (Bypass): .....................
Test system ........................................
Send Fire message: ............................
Send Auxiliary message: ....................
Send Panic message: .........................
Silence fire alarm: .............................. [access code]
Silence intrusion alarm: ..................... [access code]
Turn door chime on/off: ......................
Check alarm memory: .......................
Check troubles ..................................
Set time and date: .............................
Enter:
OR press Away (if enabled)
OR press Stay (if enabled)
[access code]
9
(from Ready state)
0
OR press
1
OR press
0
[two-digit zone number(s)],
1
[master code]
6
(press & hold for 2 seconds, if enabled) 14
(press & hold for 2 seconds, if enabled) 14
(press & hold for 2 seconds, if enabled) 14
to toggle on or off
4
OR press Chime (if enabled)
3
2
[master code]
6
Interior (if enabled)
Exit (if enabled)
#
4
1
Page:
9
10
8
11
12
10
12
to exit 15
18
13
14
20
14
16
20