Table of Contents
Advertisement
Item
Idle Time Out
MTU Size
Enable
Clone MAC Address
After finishing the settings here, please click Next.
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
If you click PPTP/L2TP as the protocol, please manually enter the Username/Password
provided by your ISP and all the required information.
Available settings are explained as follows:
Item
User Name
Password
Server Address
WAN IP Network
Settings
Description
Set the timeout for breaking down the Internet after passing
through the time without any action.
It means Max Transmit Unit for packet. The default setting
will be specified by the system automatically. Therefore,
keep this field in blank.
The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
It is available when the box of Enable is checked. Click
Clone PC Address. The result will be displayed in the field
of MAC Address.
Description
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Specify the IP address of the PPTP server.
You can choose Static IP or DHCP as WAN IP network
setting.
18
Vigor1000 Series User's Guide
Advertisement
Table of Contents
