Dialing To Single/Dual Isps - Draytek Vigor2820 Series User Manual

3 . 1 2 . 3 D i a l i n g t o
3 . 1 2 . 3 D i a l i n g t o
Select Dialing to a Single ISP if you access the Internet via a single ISP.
ISP Access Setup
PPP/MP Setup
S i n g l e / D u a l I S P s
S i n g l e / D u a l I S P s
ISP Name - Enter your ISP name such as Seednet, Hinet and so
on.
Dial Number -Enter the ISDN access number provided by your
ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
Require ISP Callback (CBCP) -If your ISP supports the
callback function, check this box to activate the Callback Control
Protocol during the PPP negotiation.
Scheduler (1-15) - Enter the index of schedule profiles to control
the Internet access according to the preconfigured schedules.
Refer to section 3.8.2 Schedule for detailed configuration.
Link Type
different purpose.
function. Dialup 64Kbps allows you to use one ISDN B channel
for Internet access. Dialup 128Kbps allows you to use both ISDN
B channels for Internet access. Dialup BOD (for detailed
information of configuration, please refer to section 3.12.4) stands
for bandwidth-on-demand. The router will use only one B channel
in low traffic situations. Once the single B channel bandwidth is
fully used, the other B channel will be activated automatically
through the dialup. For more detailed BOD parameter settings,
please refer to the section of Call Control.
PPP Authentication - PAP only allows you to configure the PPP
session to use the PAP protocol to negotiate the username and
password with the ISP. PAP or CHAP is to configure the PPP
session to use the PAP or CHAP protocols to negotiate the
username and password with the ISP.
Idle Timeout - Idle timeout means the router will be disconnect
after being idle for a preset amount of time. The default is 180
seconds. If you set the time to 0, the ISDN connection to the ISP
There are three link types provided here for
–
Link Disable disables the ISDN dial-out
203
Vigor2820 Series User's Guide