Bandwidth Limit - Draytek Vigor2820 Series User Manual

3 . 7 . 2 B a n d w i
3 . 7 . 2 B a n d w i
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large of
bandwidth and affect the applications for other programs. Please use Limit Bandwidth to make
the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Enable
Disable
Default TX limit
Default RX limit
Allow auto adjustment to
make the best utilization of
available bandwidth.
Limitation List
Start IP
Vigor2820 Series User's Guide
d t h L i m i t
d t h L i m i t
Click this button to activate the function of limit bandwidth.
nd Subnet – Check this box to apply the
Apply to 2
bandwidth limit to the second subnet specified in
LAN>>General Setup.
Click this button to close the function of limit bandwidth.
Define the default speed of the upstream for each computer in
LAN.
Define the default speed of the downstream for each computer
in LAN.
Router will detect if there is enough bandwidth remained for
using according to the bandwidth limit set by the user. If yes,
the router will adjust the available bandwidth for users to
enhance the total utilization.
Display a list of specific limitations that you set on this web
page.
Define the start IP address for limit bandwidth.
128