Lan - Created By Using Nat - Draytek Vigor2820 Series User Manual

4 . 4 L A N – C r e a t e d b y U s i n g N A T
4 . 4 L A N – C r e a t e d b y U s i n g N A T
An example of default setting and the corresponding deployment are shown below. The
default Vigor router private IP address/Subnet Mask is 192.168.1.1/255.255.255.0. The built-in
DHCP server is enabled so it assigns every local NATed host an IP address of 192.168.1.x
starting from 192.168.1.10.
You can just set the settings wrapped inside the red rectangles to fit the request of NAT usage.
To use another DHCP server in the network rather than the built-in one of Vigor Router, you
have to change the settings as show below.
Vigor2820 Series User's Guide
273