Administrator Password - Draytek Vigor2820 Series User Manual

STUN Settings
3 . 1 5 . 4 A d m i n
3 . 1 5 . 4 A d m i n
This page allows you to set new password.
Old Password
New Password
Confirm Password
When you click OK, the login window will appear. Please use the new password to access into
the web configurator again.
Vigor2820 Series User's Guide
The default is Disable. If you click Enable, please type the
relational settings listed below:
Server IP – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the minimum period. The default setting is "60 seconds".
Maximum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the maximum period. A value of "-1" indicates that no
maximum period is specified.
i s t r a t o r P a s s w o r
i s t r a t o r P a s s w o r
Type in the old password. The factory default setting for
password is "admin".
Type in new password in this field.
Type in the new password again.
d
d
238