Table of Contents
Advertisement
appendix c
Drawmer Dynamics Demo Sessions
Several demo sessions are included with Draw-
mer Dynamics. These sessions illustrate how to
use the plug-in during typical recording scenar-
ios.
Using the Demo Sessions
Before opening a demo session, you must have
already installed and authorized the Drawmer
Dynamics plug-in.
To open a demo session:
Locate and open the demo sessions folder
1
(Digidesign/Drawmer Dynamics/Drawmer Dy-
namics Demo/Demo Sessions).
Double-click the desired demo session.
2
When the session opens, press the Spacebar to
3
begin playback.
Click Bypass to compare the track with and
4
without dynamics processing.
About the Demo Sessions
Following are brief descriptions of each demo
session and the features they illustrate.
"Gated Tones" Demo
This session illustrates keying of two different
tone bursts from an existing short drum loop us-
ing the Gate. The three-channel session uses
two Gates. The key input is from the original
drum track.
The unprocessed audio in this session is
very loud. Turn down your monitoring sys-
tem if you plan to bypass the Gate.
"Snare" Demo
This session illustrates a gated reverb effect us-
ing the Gate and a modified variation of
"Gate&Comp Staccato" setting with a reduced
Gate Threshold to compensate for low signal
level. Notice how the reverberated sound is
shortened. Imagine that the reverb could also be
high level noise. Gate Release greatly affects the
output.
"Noise Removal" Demo
This session illustrates how to use the Expander
to effectively remove excessive background hiss
from a short drum loop. Use the Bypass button
to compare the processed and unprocessed au-
dio.
Appendix C: Drawmer Dynamics Demo Sessions
31
Advertisement
Table of Contents
