Operation
the remote control.
2.
Correctly install one (1) 12
Volt (A23) battery in the
battery holder.
3.
Close the battery cover.
Maintenance
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
allow at least 5 minutes for light
bulbs and heater to cool off before
touching bulbs to avoid accidental
burning of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame or when the clarity
and detail of the log exterior
disappears. There are two bulbs
under the log set which generate
the flames and embers.
Helpful Hints:
replace all light bulbs at one time
if they are close to the end of their
rated life. Group replacement will
reduce the number of times you
It is a good idea to
Battery must be recycled
or disposed of properly.
Check with your Local
authority or Retailer for recycling
advice in your area.
need to open the unit to replace
light bulbs.
Light Bulb Requirements
Quantity of 2 clear chandelier
or candelabra bulbs with a J-12
(small) socket base, 60 Watt rat-
ing. Example GE 60BC or Philips
60
CtC.
Replacement:
1.
unplug the unit from power
outlet.
2.
on the back of the Compact
Fireplace remove the screws
from the light access cover
(Figure 5).
3.
Remove the light access
cover.
4.
Reach into the opening,
locate and examine the bulbs
to determine which bulb(s)
require replacement.
11
Need help?
Do you have a question about the 20" Compact and is the answer not in the manual?