Removing the key blade
To take the key blade out of the remote
control:
– Slide the spring-loaded catch (1) to the
side while pulling the key blade (2) out.
Inserting the key blade
Be careful when inserting the key blade into
the remote control.
– Hold the remote control with the narrow
end pointing down and lower the key
blade into its slot.
– Lightly press the key blade to lock it in
position. You should hear a "click".
Active locks
1.
Active locks, remote control
2.
Active locks, key blade
Key blade
Use the key blade to lock and unlock the
glovebox. You can also lock and unlock the
drivers door with the key blade.
Weak remote control battery
When the battery runs down and full
functionality cannot be guaranteed, the infor-
mation symbol and REMOTE BATTERY
LOW VOLTAGE appear on the display.
Locks and alarm
93