Warning Triangle And Spare Wheel - Volvo V50 Owner's Manual

Hide thumbs Also See for V50:
Table of Contents

Advertisement

Warning triangle and spare wheel

Warning triangle
Follow the regulations for the use of a
1
warning triangle
. Place the warning triangle
in a suitable place with regard to the traffic.
– Undo the case containing the warning
triangle, it is attached with Velcro. Take
the warning triangle out of the case.
– Lower the warning triangle's support legs.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
1.
Certain markets
Spare wheel and jack
The car's original jack
2
The original jack
should only be used for
changing wheels. The jack's thread should
always be well greased.
The spare wheel, jack and wheel spanner are
found under the floor in the cargo area.
Taking out the spare wheel:
– Fold the rear edge of the floor mat
forward.
– Release the spare wheel and lift it out.
– Take out the jack and the wheel spanner.
2.
Certain variants and markets
Wheels and tyres
Putting the spare wheel and jack into
the cargo area:
– Wind the jack to halfway (1). The marking
on the plate (2) should line up with the
marking on the arm (3) so that the jack
can fit lying down in the holder.
– Fold in the handle (4) and place the wheel
spanner (5) on the jack.
– Put the jack back (1) in the hole on the
right (6). Fasten the spare wheel (7) in
the hole on the left (8).
141

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2005 v50

Table of Contents