Saving Configuration In A Text File - Foundry Networks NetIron M2404C Installation Manual

Metro access switches
Hide thumbs Also See for NetIron M2404C:
Table of Contents

Advertisement

Foundry NetIron M2404C/M2404F Metro Access Switches
quit
show
terminal
who
To continue initial configuration procedure perform the following steps:
1.
2.
3.
4.
5.
6.
Example:
device-name#show ip
IP-ADDR : 100.100.100.1 NET-MASK : 255.255.255.0
NOTE
7.
At this point the Initial configuration setup is completed and the switch can be accessed using
Ping or Telnet commands.

Saving Configuration in a Text File

A variety of TFTP Server programs can be used by the host computer where the software
images and configuration files are located. The only information that is required by the TFTP
Server is the location of the file on the host computer's file system.
It is recommended that the configuration be saved in an external text backup file. To write the
backup configuration file, use the command copy.
To view the copy command options type: copy ?
device-name#copy ?
FILE-NAME
January 2007
Disconnect and logout
Show running system information
Terminal configuration setup
Display who is on vty
Enter privileged (Enable) mode. Type the command: enable.
Enter configure mode. Type the command: configure terminal.
Set the switch IP address: Type the command: ip address <aa.bb.cc.dd/yy>, where
<aa.bb.cc.dd> is the IP address assigned to the switch and yy is the number of bits in
the netmask (e.g. netmask of 255.255.255.0 would be /24).
Set the default gateway IP address if the host is on a different subnet: Type the
command: ip route 0.0.0.0/0 <aa.bb.cc.dd> where <aa.bb.cc.dd> is the IP address
of the default gateway.
Return to privileged (Enable) mode: Type the command: end.
To verify if the IP addresses were set correctly, type: show ip.
The show command can be used to display a variety of parameters: Setup
Configuration and others. To view the show command options type: show ?
Type the command: write from privileged (Enable) mode.
Source file. Format: [[device/]path]file-name
Example: tftp://1.1.1.1/directory/filename.bin
© 2007 Foundry Networks, Inc.
device: flash: - local file system
tftp://A.B.C.D - TFTP server
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netiron m2404f

Table of Contents

Save PDF