6. Buckle the supplied clamp core onto the cable to against the EMI radiation.
4
Network Deployment
General Connection (without PoE)
1. If you have external DI devices, make the connection from general I/O terminal block.
2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a
switch.
Use a Category 5 Cross Cable when Network Camera is directly connected to PC.
3. Connect the supplied power cable from the Network Camera to a power outlet.
+ : Digital input
- : Digital input
The clamp core should be away
from the device at least 5 cm.
5 cm
1
3
EN - 6
Ethernet Switch
2