Adjusting The Lens - Vivotek FD8133 Quick Installation Manual

7

Adjusting the Lens

Based on the live image retrieved from the camera, adjust the camera lens to the desired
viewing angle:
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both sides of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Turn the lens to adjust the image orientation.
Rotate the screw
Turn the lens
Pan 350°
The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation
for either ceiling or wall mount.
Tilt Adjustment Screw
Loosen
1
3-axis Mechanism Design
Rotate 350°
Tilt:
FD8133: 85°
FD8134: 70°
EN - 10
Tighten
2
Tilt:
FD8133: 85°
FD8134: 70°
Pan 350°
DO NOT over rotate the lens. Doing
so will damage the camera lens
module.
3
Rotate 350°